Description
2000 Carver 506 Motor Yacht | Woptics One
Ventura, California · Three staterooms and three heads · Hard-enclosed, air-conditioned flybridge and aft deck
Woptics One makes the most of its 50-foot layout with three private staterooms, a full-beam salon, and two connected entertaining spaces above. Both the flybridge and aft deck are fully hard-enclosed and air-conditioned, so guests can stay comfortable and keep the skipper company underway. The rigid enclosures eliminate canvas and Isinglass upkeep, and the retractable hardtop sunroof lets in fresh air on open days. The aft deck has room for a seating group, with access to the side decks and swim platform.
A few steps down, the salon, galley, and dining area share one open space. Carver’s raised side decks let the salon use the yacht’s 15-foot, 4-inch beam, while two tiers of windows keep the view in sight whether you’re seated in the salon or standing in the galley. Cherry cabinetry and solid-surface counters carry through the main cabin.
The owner’s suite is aft, with an island queen berth, generous storage, and a split head with separate toilet and shower compartments. The forward VIP also has an island queen and a private head. A third stateroom with split berths and its own head gives family or guests a separate space of their own. With the owner’s suite at one end of the yacht and both guest cabins at the other, everyone has room to spread out on longer trips.
Power comes from twin 480 hp Volvo Penta TAMD74 EDC diesels, with a bow thruster for easier maneuvering around the dock. The upgraded 21 kW Kohler generator has just over 1,500 hours and supplies onboard AC power away from the dock. Teak-pattern AquaTraction decking ties together the swim platform, aft deck, flybridge, side decks, and bow.
Major maintenance and upgrades
- October 2026 — New starting, house, and thruster batteries. Inverter/charger settings updated for the new batteries.
- June 2024 — Both main engines and transmissions serviced, including engine oil and filters, fuel and air filters, raw-water impellers, and transmission fluid.
- May 2024 — New Victron 24 V bow-thruster battery charger and ProMariner 50 A galvanic isolator. Bonding system tested.
- April 2024 — New propellers and shafts. Yard work also included couplers, cutless bearings, PSS shaft seals, through-hulls and valves, rudder service, and zincs.
- October 2023 — AquaTraction decking installed from the swim platform and steps through the aft deck and flybridge, along the side decks, and forward to the bow.
The 2022 Northstar Axis 3.1 dinghy with a 25 hp Yamaha is excluded from the asking price and available by separate negotiation.
Specifications
Overview
- Asking Price
- $249,000
- Year
- 2000
- Make
- Carver
- Model
- 506 Motor Yacht
- Condition
- Used
- Type
- Motor Yachts, Aft Cabin
- Hull Material
- Fiberglass
- Location
- Ventura, CAApproximate area
Dimensions & Weight
- LOA
- 51.58 ft (15.7 m)
- Nominal Length
- 50 ft (15.2 m)
- Beam
- 15.33 ft (4.67 m)
- Draft
- 4.5 ft (1.37 m)
- Bridge Clearance
- 20.83 ft (6.35 m)
- Dry Weight
- 49,800 lb (22,589 kg)
Engines & Propulsion
- Number of Engines
- 2
- Total Power
- 960 hp
- Total Hours
- 1,088 hrs
- Fuel Type
- Diesel
- Drive Type
- Direct
- Engine 1 (Port)
- Volvo Penta TAMD74 · 480 hp · 493 hrs · Inboard · Direct
- Engine 2 (Starboard)
- Volvo Penta TAMD74 · 480 hp · 595 hrs · Inboard · Direct
Tankage
- Fuel
- 516 gal (1,953 L)
- Fresh Water
- 158 gal (598 L)
- Holding
- 95 gal (360 L)
Accommodations
- Cabins
- 3
- Heads
- 3
Photos (47)
Similar yachts for sale
Browse all yachts for sale · More Carver yachts for sale · Call +1 305-854-6020
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.



















































