2022 Novamarine BS 160 Outboard “SEA SEA II”

• 5 kw Onan generator
• Ac inside cabin
• Lumishore LED underwater lights
• JL Audio Upgraded premium audio package
• Raymarine Electronics package
• FLIR thermal imaging camera
• Stern sunshade
• Mercury Joystick for assisted docking
• Side Power - Bow thruster
• Color matched outboard cowlings

• Closed- cell foam-filled tube coated with Black, Dark Grey or Light Grey fabric
• Handrails all along the tube and mooring cleats made in AISI 316L stainless-steel
• Cockpit Bar Unit (or couch facing the stern) located behind the drivers' seats. The bar unit features a sink and a cockpit fridge
• AISI 316L stainless-steel swim ladder with teak steps
• Zinc-coated anchor and anchor chain
• Windlass and bow roller
• Centre console with interior cabin (interior layout: dinette with U-shaped couch, cupboard equipped with sink and cabinets, separate head with marine electrical toilet, sink and shower)
• Door to access inside the console with lock
• Fibreglass Hard-Top with spot-lights
• Complete set of exterior and interior cushions with variable density three-layers padding coated in Sunbrella fabric
• Fabric coating on the interior part of the tubes
• Black water system with tank and macerator pump
• Fresh water system with autoclave and tank
• Fuel system with stainless-steel tanks and fillers on both sides of the boat
• Firefighting system
• Magnetic compass
• Flush mounted horn
• Hydraulic steering with wheel by Gussi
• Storage compartment at helm with double USB socket
• Three drivers' seats with double position for driving either standing or seated + stern sunbed and couch (IOB)/stern couch (OB), bow couch, seating installed on the front part of the console + bow sunbeds
• Teak footrest for the central driver seat and stainless-steel footrest for all drivers' seats
• Exterior retractable fresh water shower installed in the interior part of the stern tube starboard side
• Navigation lights
• LED courtesy lights on the deck
• Automatic bilge pumps and manual pump for emergency
• Deck scuppers for water discharge, also located inside the swim ladder hatch and in the bow anchor locker
• Helm instrument panel with carbon-look finish
• Keypad for boat controls made in black-painted plexiglass with backlit buttons
• Monitornig instruments for engines, batteries and windlass at helm
• Safety equipment (fenders, fenders' sockets, mooring lines, lifejackets, life-ring with rope, first aid kit)
• CE Certificate - Declaration of Conformity - Engines Power Declarations
• Owner's Manual in Italian or English

• Mercury Outboard Joystick piloting system (Including Vessel View 703, Digital anchor and Autopilot)
• Side-Power Bow thruster with Joystick 12-24V installed at helm

• Complete painting with 3 layers paint of the fiberglass parts (deck, deck accessories and Hard-Top) and of the stainless-steel parts (Hard-Top mountings and pilot seats supports) in pastel or metallized colours
• Deck in solid teak made with solid teak strips 50x12mm with black – dark grey – light grey caulking
• Removal of decals from engine cover (only for Outboard models)
• N.04 engines' covers painting - matte or gloss finish (only for Outboard models)

• Predisposition to accommodate future wind protection and sunshade should will be foreseeing
• A backrest to create comfortable dining setup will be installed in aft settee
• Bow converting table that can be lowered to sunbed position (with cushion)
• Stern converting table designed to accomodate cocktail and dining setups (to be approved by the Client)
• Full Carbon Hard-Top Upgrade
• Manually foldable windscreen with windshield wiper system with fresh water wash
• The exterior bar will have a sink, cockpit fridge, storages and a concealed garbage bin
• The interior spaces will be customized according with customer requirements utilizing high grade quality materials and taps (i.e. Dornbracht or equivalent)

• Polished stainless-steel anchor
• 50m stainless anchor chain
• Stern Maxi Flagpole
• Refrigerated thermal locker (Obtained using one of the stern couch lockers) with fridge compressor, refrigerating unit, vol. 140 lt by VITRIFRIGO
• Install drawers fridge inside the cabin
• Stainless-steel AISI 316L protection on bow centerline
• Install handrail on driving console for co-pilot
• Pair of side teak step on the tube for side boarding (stern area)
• Pair of side folding doors on tube amidships with tealìk finishing, swim ladder and retractable fresh water showers
• Increase in black water tank capacity (70 liters)
• Install towing ring on the base of the stern flagpole
• Carbon passerelle (length: 220cm and equipped with storage bag) - (Only for Sterndrives Model)

• CHARGEMASTER battery charger with a shore power plug and cable for ground recharge 230V.
• Generator ONAN 6000 – 5 KW – 3000 RPM completed with insulation box and installed on elastic mounts.
• Lumishore Supra SMX53 underwater lights White/Blue (set of No.04 LED lights for underwater lighting of the stern area)
• Adjustable searchlight installed on the T-Top with remote control radio Marco T3
• Air conditioning inside the cabin (16000 BTU) by Frigomar
• Hot water system: This will require a 40 liters boiler which will be powered by the boat’s alternating current system; thus enabling to use it with running Generator or with shore power plugged in

JL MARINE upgraded Audio system with PREMIUM LED line products:

• N.02 pair of speakers on the Hard-Top (mod. JL Audio M6-650X-S-GmTi e M6-770X-S-GmTi)
• N.02 pair of speakers at bow (mod. JL Audio M6-770X-S-GmTi e M6-650X-S-GmTi)
• N.02 pair of speakers inside the cabin (mod. JL Audio M6-650X-S-GmTi)
• N.02 subwoofers, one at bow and one under the cockpit bar unit (mod. JL Audio M6-10IB-S-GmTi-4)
• N.03 amplifiers: n.02 mod. JL Audio MHD900/5 - 60A (12 volt) and n.01 amplifier MHD600/4 - 50A
• N.01 marine source FUSION Apollo 770

Raymarine Electronics Package:

• N.02 Raymarine multifunction touchscreen displays AXIOM 12’’ standard chart
• Fixed VHF Ray 90
• Echo sounder module with in-hull transducer P79

- Flir Thermal Camera M232 IP (320 x 240, 9Hz) with Pan/Tilt movement and e-zoom

- Installation of a bow camera for the anchor chain with interface on the helm multifunction screen

- Raymarine Radar antenna patch array HD Color RD418HD 24nm E92142

• Cover for bow couch
• Cover for stern couch (OB)
• Cover for the seat installed on the front part of the console + console sunbeds
• Cover for drivers' seats + bar unit or rear couch
• Cover for helm instruments
• Stern sunshade with anchoring points on the rear part of the console and stern poles.
• Side-sunshades
• Bow and Stern sunshades